Sediplus® System Solutions
Sediplus® System Solutions
|Product description||S-Monovette®, blood sedimentation, 4NC, preparation: Trisodium citrate solution, nominal volume: 2 ml, (LxØ) with cap: 82 x 11 mm, with plastic label, label/print: transparent/violet, cap violet, colour code EU, sterile, 50 piece(s)/case|
|Type of collection||venous|
|Type of preparation||Trisodium citrate solution|
|Preparation concentration||0.106 mol/l|
|Label/ Print||with plastic label|
|Colour of print/label||transparent/violet|
|Cap||membrane screw cap|
|Type of cap||screw cap|
|Suitable for||Sediplus® S 100|
|Sample volume||2 ml|
|Length including cap||82 mm|
|Length excluding cap||66 mm|
|Length including cap and plunger||103 mm|
|Colour of product||transparent|
|Cap material||High Density Polyethylene (HD-PE)|
|Colour of cap||violet|
|Tube material||Polypropylene (PP)|
|Piston material||High Density Polyethylene (HD-PE)|
|Piston plunger material||Polystyrene (PS)|
|Satisfies the requirement||IATA, ADR|
|Product category||In-vitro diagnostic, CE|
|Minimum order qty.||500|
|Type of inner packaging||case|
|Piece(s) / inner box||50|
|Piece(s) / case||500|
|Piece(s) / pallet||56000|
|Depth of box||145 mm|
|Width of box||108 mm|
|Height of box||63 mm|
|Depth of case||333 mm|
|Width of case||303 mm|
|Height of case||125 mm|
|Case volume||0.0126 cbm|
|Weight of product||0.004 kg|
|Weight of case||2.56 kg|
|EAN of inner box||4038917085298|
Yes, the ESR analysers can be integrated through an interface.
No, each measuring station can be filled individually / independently of time.
Yes, ESR can be automatically determined with the Sediplus® S 200 (10 measuring stations) or the Sediplus® S 2000 (40 to 160 measuring stations).
In principle, for blood sedimentation the S-Sedivette® should be carefully mixed after blood collection. According to the CLSI standard, the measurement must be started at the latest 4–6 hours after blood collection. The first reading of the blood sedimentation rate (ESR) should take place after 60 minutes.
The S-Sedivette® is prepared with trisodium citrate solution, which is 20% of the nominal volume. This ensures the important ratio for blood sedimentation of 1 part citrate + 4 parts blood.
The S-Sedivette® has a shelf life of 15 months.
Yes, the S-Sedivette® must be mixed well immediately after blood collection: tilt the S-Sedivette® upside down carefully five times. The air bubble/glass bead must always travel right up to the end! Do not shake it quickly. The special mixing devices Sarmix® M 200 and Sarmix® M 2000 are recommended for safety and to save time.
The S-Sedivette® was developed and evaluated for determining the blood sedimentation rate (ESR) according to the Westergren method.