
Sediplus® System Solutions
Sediplus® System Solutions

Language:
The S-Sedivette® venous blood collection system enables hygienic, easy handling in an enclosed system. The Microvette® CB 200 ESR blood collection system is designed for 200 µl of blood only and ensures minimal patient discomfort when collecting blood. Both systems are proven to perform well in comparison with the Westergren method.
S-Sedivette®, blood sedimentation, 4NC, preparation: Trisodium citrate/citric acid buffer solution, nominal volume: 3.5 ml, (LxØ) with cap: 146 x 8 mm, with paper label, cap violet, sterile, 50 piece(s)/inner box
S-Sedivette®, blood sedimentation, 4NC, preparation: Trisodium citrate/citric acid buffer solution, nominal volume: 3.5 ml, (LxØ) with cap: 146 x 8 mm, with paper label, cap black, sterile, 50 piece(s)/inner box
ESR rack, suitable for S-Sedivette®, 10 measuring stations
S-Monovette®, preparation: Trisodium citrate solution, nominal volume: 2 ml, (LxØ) with cap: 82 x 11 mm, with plastic label, cap violet, sterile, 50 piece(s)/inner box
S-Monovette®, preparation: Trisodium citrate solution, nominal volume: 2 ml, (LxØ) with cap: 82 x 11 mm, with paper label, cap violet, sterile, 50 piece(s)/inner box
S-Monovette®, preparation: Trisodium citrate solution, nominal volume: 2 ml, (LxØ) with cap: 82 x 11 mm, with paper label, cap black, sterile, 50 piece(s)/inner box
ESR pipette, with fitted piston insert
ESR pipette, with printed graduation and assembled piston insert, with print
ESR rack, suitable for S-Monovette®, with back panel
ESR rack, suitable for S-Monovette®, without back panel
Yes, the ESR analysers can be integrated through an interface.
No, each measuring station can be filled individually / independently of time.
Yes, ESR can be automatically determined with the Sediplus® S 200 (10 measuring stations) or the Sediplus® S 2000 (40 to 160 measuring stations).
In principle, for blood sedimentation the S-Sedivette® should be carefully mixed after blood collection. According to the CLSI standard, the measurement must be started at the latest 4–6 hours after blood collection. The first reading of the blood sedimentation rate (ESR) should take place after 60 minutes.
The S-Sedivette® is prepared with trisodium citrate solution, which is 20% of the nominal volume. This ensures the important ratio for blood sedimentation of 1 part citrate + 4 parts blood.
The S-Sedivette® has a shelf life of 15 months.
Yes, the S-Sedivette® must be mixed well immediately after blood collection: tilt the S-Sedivette® upside down carefully five times. The air bubble/glass bead must always travel right up to the end! Do not shake it quickly. The special mixing devices Sarmix® M 200 and Sarmix® M 2000 are recommended for safety and to save time.
The S-Sedivette® was developed and evaluated for determining the blood sedimentation rate (ESR) according to the Westergren method.