What are the advantages of using a miniPERM® bioreactor?

The miniPERM® is an easy-to-handle bioreactor which was developed for the cultivation of eukaryotic cells such as mammal cells, insect cells and plant cells in high density and therefore for biomass production and for the production of cell products. The sub-division of the bioreactor into production and nutrient modules and the rotating cultivation allow for the production of highly concentrated cell products in small volumes. Therefore, depending on the cell line, cell densities of more than 107 cells/ml and product concentrations of several mg/ml can be achieved. This means that the miniPERM® bioreactor is a cost-effective and time-saving alternative to conventional tissue and roller bottles and to fermentation systems.

In which sizes and designs is the miniPERM® bioreactor available?

The production module of the miniPERM® bioreactor is available for suspension cells in volumes of 35 ml or 50 ml. We offer a production module with a stationary matrix for adherent cells.

How is the miniPERM® bioreactor subdivided?

The miniPERM® bioreactor is subdivided into a production module and a nutrient module (two-compartment system) by a dialysis membrane. The dialysis membrane has a cut-off size of 12.5 kDa, so that that neither cells nor secreted cell products can diffuse into the nutrient module. At the same time, however, the exchange of nutrients and cell metabolites takes place via the dialysis membrane.

Product - Sarstedt

Order number	94.6077.138
Product description	miniPERM®, Filling tube 5'', for miniPERM® bioreactor, not autoclavable, sterile, 1 piece(s)/blister

Order number

94.6077.138

Product description

miniPERM®, Filling tube 5'', for miniPERM® bioreactor, not autoclavable, sterile, 1 piece(s)/blister

Suitable for	miniPERM® bioreactor

Diameter	5.9 mm
Width of product	5.9 mm
Height of product	127 mm
Length of product	5.9 mm

Diameter

5.9 mm

Width of product

5.9 mm

Height of product

127 mm

Length of product

5.9 mm

Product material	Low Density Polyethylene (LD-PE)
Colour of product	transparent

Product material

Low Density Polyethylene (LD-PE)

Colour of product

transparent

Product category	no medical device \| IVD
Purity standard	sterile
Sterilisation	Gas sterilisation
Batched	yes

Product category

no medical device | IVD

Purity standard

sterile

Sterilisation

Gas sterilisation

Batched

yes

Minimum order qty.	50
Type of smallest subpackaging	blister
Piece(s) / inner box	50
Piece (s) / outer case	300
Piece(s) / pallet	14400
Depth of case	353 mm
Width of case	268 mm
Height of case	260 mm
Case volume	0.0246 cbm
Weight of product	0.001 kg
Weight of case	1.55 kg
EAN of inner box	4038917376488
EAN case	4038917255974

Minimum order qty.

Type of smallest subpackaging

blister

Piece(s) / inner box

Piece (s) / outer case

300

Piece(s) / pallet

14400

Depth of case

353 mm

Width of case

268 mm

Height of case

260 mm

Case volume

0.0246 cbm

Weight of product

0.001 kg

Weight of case

1.55 kg

EAN of inner box

4038917376488

EAN case

4038917255974

General

+

What are the advantages of using a miniPERM® bioreactor?

The miniPERM® is an easy-to-handle bioreactor which was developed for the cultivation of eukaryotic cells such as mammal cells, insect cells and plant cells in high density and therefore for biomass production and for the production of cell products. The sub-division of the bioreactor into production and nutrient modules and the rotating cultivation allow for the production of highly concentrated cell products in small volumes. Therefore, depending on the cell line, cell densities of more than 107 cells/ml and product concentrations of several mg/ml can be achieved. This means that the miniPERM® bioreactor is a cost-effective and time-saving alternative to conventional tissue and roller bottles and to fermentation systems.
+

In which sizes and designs is the miniPERM® bioreactor available?

The production module of the miniPERM® bioreactor is available for suspension cells in volumes of 35 ml or 50 ml. We offer a production module with a stationary matrix for adherent cells.
+

How is the miniPERM® bioreactor subdivided?

The miniPERM® bioreactor is subdivided into a production module and a nutrient module (two-compartment system) by a dialysis membrane. The dialysis membrane has a cut-off size of 12.5 kDa, so that that neither cells nor secreted cell products can diffuse into the nutrient module. At the same time, however, the exchange of nutrients and cell metabolites takes place via the dialysis membrane.