Product

miniPERM®, Screw cap, for miniPERM® nutrient module

Order number: 94.6077.037
miniPERM®, Screw cap, for miniPERM® nutrient module

Product description

Order number 94.6077.037
Product description miniPERM®, Screw cap, for miniPERM® nutrient module, not autoclavable, sterile, non-pyrogenic/endotoxin-free, non-cytotoxic, 1 piece(s)/blister

Product characteristics

Suitable for miniPERM® nutrient module

Material & colours

Product material High Density Polyethylene (HD-PE)

Purity & certification

Product category no medical device | IVD
Purity standard sterile, non-pyrogenic/endotoxin-free, non-cytotoxic
Sterilisation Gamma irradiation
Pyrogen-free yes
Non-cytotoxic yes
Batched yes

Packaging

Minimum order qty. 16
Type of smallest subpackaging blister
Piece(s) / inner box 16
Piece (s) / outer case 64
Piece(s) / pallet 2304
Depth of case 388 mm
Width of case 253 mm
Height of case 225 mm
Case volume 0.0221 cbm
Weight of product 0.0081 kg
Weight of case 1.2 kg
EAN of inner box 4038917255776
EAN case 4038917255769
Product specification

General

  • +

    What are the advantages of using a miniPERM® bioreactor?

    The miniPERM® is an easy-to-handle bioreactor which was developed for the cultivation of eukaryotic cells such as mammal cells, insect cells and plant cells in high density and therefore for biomass production and for the production of cell products. The sub-division of the bioreactor into production and nutrient modules and the rotating cultivation allow for the production of highly concentrated cell products in small volumes. Therefore, depending on the cell line, cell densities of more than 107 cells/ml and product concentrations of several mg/ml can be achieved. This means that the miniPERM® bioreactor is a cost-effective and time-saving alternative to conventional tissue and roller bottles and to fermentation systems.

  • +

    In which sizes and designs is the miniPERM® bioreactor available?

    The production module of the miniPERM® bioreactor is available for suspension cells in volumes of 35 ml or 50 ml. We offer a production module with a stationary matrix for adherent cells. 

  • +

    How is the miniPERM® bioreactor subdivided?

    The miniPERM® bioreactor is subdivided into a production module and a nutrient module (two-compartment system) by a dialysis membrane. The dialysis membrane has a cut-off size of 12.5 kDa, so that that neither cells nor secreted cell products can diffuse into the nutrient module. At the same time, however, the exchange of nutrients and cell metabolites takes place via the dialysis membrane.

Go to top

We would like to show you additional content which is hosted by a third party. For this purpose we need your consent to set cookies:

Disposable syringe, for miniPERM® bioreactor, 50 ml, Luer lock

Disposable syringe, for miniPERM® bioreactor, 50 ml, Luer lock

Disposable syringe, for miniPERM® bioreactor, 50 ml, Luer lock

X
Downloads: