Product

miniPERM®, Start-up support kit, for miniPERM® bioreactor

Order number: 94.6001.094
miniPERM®, Start-up support kit, for miniPERM® bioreactor

Product description

Order number 94.6001.094
Product description miniPERM®, Start-up support kit, accessories for inoculation, sample collection and harvesting, for miniPERM® bioreactor, not autoclavable, set components: 8 x disposable syringe 50 ml, 20 x disposable syringe 2 ml, 8 x filling tube, 20 x needle, 6 x septum cap, 1 x miniPERM® stand, 1 piece(s)/bag

Product characteristics

Application accessories for inoculation, sample collection and harvesting
Suitable for miniPERM® bioreactor

Purity & certification

Product category no medical device | IVD
Batched yes

Packaging

Minimum order qty. 1
Type of smallest subpackaging bag
Piece(s) / inner box 1
Piece (s) / outer case 1
Piece(s) / pallet 96
Depth of case 348 mm
Width of case 278 mm
Height of case 140 mm
Case volume 0.0135 cbm
Weight of product 0.481 kg
Weight of case 0.93 kg
EAN of inner box 4038917254939
EAN case 4038917254922
Product specification

General

  • +

    What are the advantages of using a miniPERM® bioreactor?

    The miniPERM® is an easy-to-handle bioreactor which was developed for the cultivation of eukaryotic cells such as mammal cells, insect cells and plant cells in high density and therefore for biomass production and for the production of cell products. The sub-division of the bioreactor into production and nutrient modules and the rotating cultivation allow for the production of highly concentrated cell products in small volumes. Therefore, depending on the cell line, cell densities of more than 107 cells/ml and product concentrations of several mg/ml can be achieved. This means that the miniPERM® bioreactor is a cost-effective and time-saving alternative to conventional tissue and roller bottles and to fermentation systems.

  • +

    In which sizes and designs is the miniPERM® bioreactor available?

    The production module of the miniPERM® bioreactor is available for suspension cells in volumes of 35 ml or 50 ml. We offer a production module with a stationary matrix for adherent cells. 

  • +

    How is the miniPERM® bioreactor subdivided?

    The miniPERM® bioreactor is subdivided into a production module and a nutrient module (two-compartment system) by a dialysis membrane. The dialysis membrane has a cut-off size of 12.5 kDa, so that that neither cells nor secreted cell products can diffuse into the nutrient module. At the same time, however, the exchange of nutrients and cell metabolites takes place via the dialysis membrane.

Go to top

We would like to show you additional content which is hosted by a third party. For this purpose we need your consent to set cookies:

Disposable syringe, for miniPERM® bioreactor, 50 ml, Luer lock

Disposable syringe, for miniPERM® bioreactor, 50 ml, Luer lock

Disposable syringe, for miniPERM® bioreactor, 50 ml, Luer lock

X
Downloads: