lumox® Reference Guide
lumox® Reference Guide
|Product description||Cell culture flask, T-175, material: PS, surface: Standard, for adherent cells, coding colour: red, Filter cap, TC Tested, 5 piece(s)/bag|
|Cell type||adherent cells|
|Growth area||175 cm²|
|Volume of work||50 ml - 125 ml|
|Product material||Polystyrene (PS)|
|Closure material||Polyethylene (PE)|
|Colour of cap||red|
|Product category||no medical device | IVD|
|Purity standard||TC Tested|
|Minimum order qty.||40|
|Type of smallest subpackaging||bag|
|Piece(s) / inner box||5|
|Piece (s) / outer case||40|
|Piece(s) / pallet||960|
|Depth of case||522 mm|
|Width of case||267 mm|
|Height of case||450 mm|
|Case volume||0.0627 cbm|
|Weight of product||0.1057 kg|
|Weight of case||5.62 kg|
|EAN of inner box||4038917337748|
We offer cell culture tubes in sizes T-25, T-75 and T-175.
We have dishes with diameters of 35 mm, 60 mm, 100 mm and 150 mm.
For multiple cultivation on an average to small scale, we offer tissue culture plates with 6, 12, 24, 48 and 96 wells.
In general, our cell culture products can be coated without any problems. In addition to the standard cell culture surface for adherent cells (red colour code), we also offer an additional service for sensitive, adherent cells (e.g. primary cells, cells under serum-reduced conditions). Polar groups are also brought into the hydrophilic surface via a special treatment of the plastic surface. This leads to improved imitation of the in vivo environment and therefore to the adhesion of challenging cells. Due to its properties, the Cell+ surface (yellow colour code) can make the use of coated culture vessels redundant in many cases.
All tissue culture bottles are equipped with a user-friendly quick-release cap which is available either as a ventilation cap or a two-position screw cap.
The coloured marking on the cell culture bottles, dishes and plates represents the surface of the cell culture tube. In order to meet the requirements for as many different cell types as possible, we offer flasks, dishes and plates with three different growth surfaces:
- Red: The hydrophilic standard growth surface provides an optimum culture substrate for the most adherent cells.
- Yellow: The yellow Cell+ growth surface was developed for particularly sensitive adherent cells (e.g. primary cells, sensitive cell culture lines and cells which are cultivated under serum-reduced/serum-free conditions). Due to its properties, the Cell+ surface can make the use of coated culture vessels redundant in many cases.
- Green: We have a hydrophobic growth surface for suspension cells. The hydrophobic surface is particularly suitable for the cultivation of suspension cells and minimises cell losses during the sub-cultivation due to unwanted microadhesion.