Cool and Warm Transport Containers
Cool and Warm Transport Containers
The mailing containers are suited for the transport of diagnostic samples. Leakproof at a pressure difference of 95 kPa and combined with an absorbent liner, they are ideal for use as secondary containers in compliance with the P650/ADR packaging instructions. The mailing containers and screw caps are made from environmentally neutral polypropylene and are autoclavable up to 121°C.
Mailing container, round, transparent, construction: round, with absorbent liner, length: 114 mm, Ø opening: 44 mm, without cap, cap: natural, 50 piece(s)/case
Screw cap, natural, suitable for mailing container 114 x 44 mm, 50 piece(s)/case
Mailing container, square, construction: square, (LxW): 117 x 35 mm, Ø opening: 28 mm, cap enclosed, cap: natural, 50 piece(s)/case
Mailing container, square, construction: square, with absorbent liner, (LxW): 117 x 35 mm, Ø opening: 28 mm, cap enclosed, cap: natural, 50 piece(s)/case
Mailing container, (LxW): 179 x 35 mm, Ø opening: 28 mm, cap enclosed, cap: natural, 50 piece(s)/bag
Mailing container, with absorbent liner, (LxW): 179 x 35 mm, Ø opening: 28 mm, cap enclosed, cap: natural, 50 piece(s)/bag
Screw cap, red, suitable for mailing container 126 x 30 mm, 50 piece(s)/case
Screw cap, yellow, suitable for mailing container 126 x 30 mm, 50 piece(s)/case
Mailing container, round, brown, construction: round, with absorbent liner, length: 126 mm, Ø opening: 30 mm, without cap, 50 piece(s)/case
Absorbent liner, suitable for mailing container 114 x 44 mm, (LxW): 135 x 95 mm, 100 piece(s)/case
This is an exemption under category B (infectious substances allocated UN3373), but only applies if there is a professional assessment (e.g. from a doctor) stating that the patient samples to be shipped have no or minimal likelihood of containing a pathogen.
This assessment should be made on the basis of the known patient history, symptoms and individual background of the patient.
When being shipped, the samples must be packaged in accordance with P650. This exemption is not subject to the regulations of ADR and can therefore be transported with a courier driver with the label "EXEMPT HUMAN SPECIMEN" or "EXEMPT ANIMAL SPECIMEN".
The transport cases have a confirmation from BAM (Bundesanstalt für Materialforschung und -prüfung, Federal Institute for Materials Research and Testing) that they can be shipped in accordance with P650 ADR. Certification of this can be requested from customer services.
We recommend that cool transport containers are disposed of after five years. If you wish to dispose of the container, please ask for the safety data sheet.
You can use this data sheet to contact your regional disposal company, which will be able to give you information on how to dispose of the container in the most environmentally friendly way possible.
Please note that disposal regulations may differ from region to region.
The foam attached inside the transport case cannot be replaced.
In accordance with the packaging instructions P650, packaging for UN3373 must consist of at least three components:
- a primary tube
- a secondary tube
- outer packaging.
It is necessary to ensure that the two tubes are impervious to liquids (if liquid substances are being shipped) and one of the two has an internal pressure of 95 kPa (0.95 bar) with no loss of filling material.
An absorbent material which can soak up the entire filling quantity must be inserted between the two tubes.
At least one of the surfaces of the outer packaging must have minimum dimensions of 100 x 100 mm.
Wipe disinfection is recommended as a method of cleaning as this method rules out the risk of the product being subjected to mechanical or thermal stress.
In accordance with the regulations of Deutsche Post AG and the packaging directive P650 IATA/ADR, the mailing containers are a valid shipping system.
The mailing containers can be used for all Sarstedt mailing containers, and their integrated locking mechanism and the attached foam bag offer optimal fixation and padding of the secondary tube.