Cool and Warm Transport Containers
Cool and Warm Transport Containers
Language:
Boxes
The transport boxes conform to the P650 IATA/ADR packaging instructions and can therefore be used to transport diagnostic specimens of substance class UN3373. In addition, these boxes are a valid system according to Deutsche Post AG regulations and can also be shipped as "exempt medical specimens" (P650 "light"). An integrated locking mechanism or the attached foam bag ensure the safe and optimally fixed transport of the secondary containers.
-
Post transport packaging, 198 x 107 x 38 mm 95.900
Post-transport packaging for diagnostic samples in accordance with packaging regulation P 650, oversize letter, structural authorisation, flat design (length 198 mm x width 107 mm x height 38 mm), 50 sterile pieces packed non-erected in the bag
- Satisfies the requirement:
- P 650, IATA, ADR
- Height of product:
- 38 mm
-
Post transport packaging, 107 x 198 x 50 mm 95.901
Post-transport packaging for diagnostic samples in accordance with packaging regulation P 650, oversize letter, structural authorisation, high design, (length 191 mm x width 107 mm x height 50 mm), 50 sterile pieces packed non-erected in the bag
- Satisfies the requirement:
- P 650, IATA, ADR
- Height of product:
- 50 mm
-
Post transport packaging, 220 x 170 x 45 mm 95.902
Large post-transport packaging for diagnostic samples in accordance with packaging regulation P 650, oversize letter, structural authorisation, flat design (length 220 mm x width 170 mm x height 40 mm), 50 sterile pieces packed non-erected in the bag
- Satisfies the requirement:
- P 650, IATA, ADR
- Height of product:
- 45 mm
-
Post transport packaging, 192 x 146 x 75 mm, for cold transport container 95.903
Transport and mailing packaging for diagnostic samples in accordance with packaging regulation P 650, structural authorisation, suitable as secondary packaging for cool transport containers, dimensions: length 192 mm x width 146 mm x height 77 mm.
- Satisfies the requirement:
- P 650, IATA, ADR
- Height of product:
- 75 mm
-
Cold transport container, german 95.995
Mailing packaging for cool transport, German
- Satisfies the requirement:
- P 650, ADR
- Height of product:
- 170 mm
-
Polystyrene container, suitable as outer packaging for cool transport 95.1011
Styrofoam casing for cool transport
- Height of product:
- 168 mm
-
Cold transport container for blood gas capillaries, transparent 95.997
Cool containers for blood gas capillaries and Blood Gas Monovettes, packed in the styrofoam container
- Height of product:
- 140 mm
-
Cold transport container, english 95.1123
Mailing container for cool transport, english
- Satisfies the requirement:
- P 650, ADR
- Height of product:
- 170 mm
-
Cold transport container, french 95.1124
Mailing container for cool transport, french
- Satisfies the requirement:
- P 650, ADR
- Height of product:
- 170 mm
-
Cold transport container, flemish 95.1625
Mailing container for cool transport, flemish
- Satisfies the requirement:
- P 650, ADR
- Height of product:
- 170 mm
-
Slide mailing container, length: 85 mm 86.972
Mailing vessel for slides made of PP, with attached lid with ventilation opening, suitable for transport or storage of 2-4 slide racks, 50 pcs./bag
-
Slide mailing container, length: 85 mm 86.972.150
Mailing vessel for slides made of PP, with attached lid without ventilation opening, suitable for transport or storage of 2-4 slide racks, 50 pcs./bag
Language:
Transport and Mailing Systems
General
-
+
Can the foam inside the transport cases be replaced?
The foam attached inside the transport case cannot be replaced.
-
+
What does "three-component packaging" mean in terms of the shipping of diagnostic samples in substance class UN3373?
In accordance with the packaging instructions P650, packaging for UN3373 must consist of at least three components:
- a primary tube
- a secondary tube
- outer packaging.
It is necessary to ensure that the two tubes are impervious to liquids (if liquid substances are being shipped) and one of the two has an internal pressure of 95 kPa (0.95 bar) with no loss of filling material.
An absorbent material which can soak up the entire filling quantity must be inserted between the two tubes.
At least one of the surfaces of the outer packaging must have minimum dimensions of 100 x 100 mm.
-
+
How are the Transport Cases cleaned?
Wipe disinfection is recommended as a method of cleaning as this method rules out the risk of the product being subjected to mechanical or thermal stress.
-
+
Can the mailing containers be sent by post?
In accordance with the regulations of Deutsche Post AG and the packaging directive P650 IATA/ADR, the mailing containers are a valid shipping system.
-
+
For which products are the mailing containers designed?
The mailing containers can be used for all Sarstedt mailing containers, and their integrated locking mechanism and the attached foam bag offer optimal fixation and padding of the secondary tube.
-
+
What do P650 "light" and "exempt human specimen" mean?
This is an exemption under category B (infectious substances allocated UN3373), but only applies if there is a professional assessment (e.g. from a doctor) stating that the patient samples to be shipped have no or minimal likelihood of containing a pathogen.
This assessment should be made on the basis of the known patient history, symptoms and individual background of the patient.
When being shipped, the samples must be packaged in accordance with P650. This exemption is not subject to the regulations of ADR and can therefore be transported with a courier driver with the label "EXEMPT HUMAN SPECIMEN" or "EXEMPT ANIMAL SPECIMEN".
-
+
Can the transport cases be shipped in accordance with P650 ADR?
The transport cases have a confirmation from BAM (Bundesanstalt für Materialforschung und -prüfung, Federal Institute for Materials Research and Testing) that they can be shipped in accordance with P650 ADR. Certification of this can be requested from customer services.
-
+
What is the correct method for disposing of a cool transport container?
We recommend that cool transport containers are disposed of after five years. If you wish to dispose of the container, please ask for the safety data sheet.
You can use this data sheet to contact your regional disposal company, which will be able to give you information on how to dispose of the container in the most environmentally friendly way possible.
Please note that disposal regulations may differ from region to region.
User Guide Cool and warm transport container
User Guide Cool and warm transport container
Language: