Sediplus® System Solutions
Sediplus® System Solutions
|Product description||S-Sedivette®, blood sedimentation, 4NC, preparation: Trisodium citrate/citric acid buffer solution, nominal volume: 3.5 ml, (LxØ) with cap: 146 x 8 mm, with paper label, label/print: violet, cap violet, colour code EU, sterile, 50 piece(s)/case|
|Type of collection||venous|
|Type of preparation||Trisodium citrate/citric acid buffer solution|
|Preparation concentration||0.105 mol/l pH 5.5|
|Label/ Print||with paper label|
|Colour of print/label||violet|
|Cap||membrane screw cap|
|Closure type||screw cap|
|Sample volume||3.5 ml|
|Length including cap||146 mm|
|Length excluding cap||130 mm|
|Length including cap and plunger||167 mm|
|Colour of product||transparent|
|Closure material||High Density Polyethylene (HD-PE)|
|Colour of cap||violet|
|Tube material||Polypropylene (PP)|
|Piston material||High Density Polyethylene (HD-PE)|
|Piston plunger material||Polystyrene (PS)|
|Satisfies the requirement||IATA, ADR|
|Product category||In-vitro diagnostic, CE|
|Minimum order qty.||500|
|Type of smallest subpackaging||case|
|Piece(s) / inner box||50|
|Piece (s) / outer case||500|
|Piece(s) / pallet||36000|
|Depth of box||143 mm|
|Width of box||171 mm|
|Height of box||63 mm|
|Depth of case||333 mm|
|Width of case||303 mm|
|Height of case||190 mm|
|Case volume||0.0192 cbm|
|Weight of product||0.0052 kg|
|Weight of case||3.29 kg|
|EAN of inner box||4038917133111|
Yes, the Sediplus® S 2000 NX can be integrated through an interface.
No, each measuring station can be filled individually / independently of time.
Yes, the ESR can be determined automatically with the Sediplus® S 2000 NX (40 measuring stations).
For blood sedimentation, the S-Sedivette® should always be carefully mixed after blood collection. According to the CLSI standard, the measurement must be started no later than 4 hours after blood collection. The first reading of the blood sedimentation rate (ESR) should take place after 60 minutes.
The S-Sedivette® is prepared with trisodium citrate solution, which is 20% of the nominal volume. This ensures the important ratio for blood sedimentation of 1 part citrate + 4 parts blood.
The S-Sedivette® has a shelf life of 15 months.
Yes, the S-Sedivette® must be mixed thoroughly immediately after blood collection: invert the S-Sedivette® slowly five times. The air bubble / glass bead must always travel to the other end. Do not shake it back and forth quickly. For safety and to save time, we recommend the special Sarmix® M 2000 mixers.
The S-Sedivette® was developed and evaluated for determining the blood sedimentation rate (ESR) according to the Westergren method.