Spinal needle 24Gx90 pp +Int.

Order number: 79.8081.811
Spinal needle 24Gx90 pp +Int.

Product description

Order number 79.8081.811
Product description Spinal needle pencil-point 24G x 90mm +Int., Ø 0,55mm, with introducer 20G Ø 0,90mm x 30mm

Product characteristics

Colour code Purple
Application For single-shot spinal anaesthesia
Introducer 20Gx30mm
Point sharpening Pencil-point
Connection Luer (w)


Diameter of needle (external) 24G/0,55 mm
Length of product 20 cm
Length of needle 90 mm

Purity & certification

Product in accordance with MDD or IVDD Medical Device
CE certified CE0482
Sterilisation sterile
Lot or serial number batched


Minimum order qty. 20
Type of packaging individual sterile packaging
Pcs. / inner box 20
Pcs. / box 400
Pcs. / pallet 19200
Case volume 0,032 cbm
Weight of case 3,19 KG
EAN of inner box 4028339112221
EAN of outer box 4028339112214
Product specification


  • +

    Does a pencil-point tip reduce the post-puncture headache?

    The cause of the post-puncture headache is a loss of cerebrospinal fluid via the perforation site in the dura. The use of a needle which is as thin as possible coupled with the atraumatic shape of the pencil-point tip lead to very pronounced dural resistance and a very small puncture hole. This enables a significant reduction in the post-puncture headache.

  • +

    What is the relevance of a large diameter of the lateral opening on the needle tip?

    A large lateral eye diameter has no relevance. According to the fluid mechanics principle of the lowest possible cross section, a lateral opening adapted to the internal diameter leads to rapid cerebrospinal fluid return flow and optimal injection of the anaesthetic.

  • +

    Why are SARSTEDT spinal needles also available with a non-Luer connector?

    In the past few years, there have been several serious cases of incorrect administration of medication when carrying out regional anaesthesia, as a result of confusion regarding neuraxial and intravenous accesses.

    In order to protect patients against mix-ups in the future, the ISO 80369 series of standards has been developed. It recommends working with separate connectors even when carrying out regional anaesthesia.

    In order to meet these requirements for greater levels of patient safety, we are therefore offering with immediate effect regional anaesthesia instruments and accessories with NRFitTM Non-Luer connectors, which significantly decrease the occurrence of incidents caused by the accidental use of incorrect medication in the case of intravenous applications and neuraxial blockade techniques.

    The NRFitTM Non-Luer connector is a connector designed specifically for regional anaesthesia which is characterised by its incompatibility with Luer connectors, although it is based on the functional principle of the Luer connector. This enables a convenient change of system without laborious adaptation to a new handling technique.

    You can not only identify the NRFitTM products from the relevant logo but also from yellow markings on the packaging and the products themselves. This means they can be quickly differentiated from other products and identified as part of the regional anaesthesia.

  • +

    How are the needle sizes defined by gauge sizes?

    Gauge is a description and measurement unit of the width or the outer diameter of needles and tubes. The number of the gauge is reciprocal to the diameter, in other words the higher the G, the lower the diameter.  The conversion to millimetres, the external diameter and colour coding is standardised in EN ISO 6009 and EN ISO 9626.

Go to top